星球大战五〇一军团中国驻防军 Star Wars 501st Legion Chinese Garrison

 找回密码
 注册

QQ登录

只需一步,快速开始

搜索
12
返回列表 发新帖
楼主: DarthZ

ESB 达斯 维达道具服 501标准

[复制链接]
 楼主| 发表于 2011-3-17 20:10:38 | 显示全部楼层

9

Belt & Belt Boxes: Black leather: or other material of similar look and feel belt, two–two and one quarter inches wide, composed of a buckle, two boxes, and light saber hook. The buckle is black and rectangular. It has an overlying silver “D” with narrow ascending rectangular cutouts from left to right. The smallest cutout is a hole, not a rectangle; on the wearer’s right and a raised silver circle to the wearer’s left. The belt boxes mirror one another. From the center outwards, each box has two green square light panels above a rectangular strip of inset hose, a small red light, and six silver posts/ knobs in two vertical columns of three. The green rectangular lights flat and without bevel. The red lights may be mounted in a metal bezel slightly larger than the light itself. All lights are constantly lit. Boxes should be placed centered vertically on the belt approximately one to two inches on each side of the buckle plate. The hook that holds the lightsaber is riveted with two rivets on the left hip side approximately one-half inch from the left belt box.
皮带和维生盒:皮带为黑色牛皮,或其他看上去或者感觉是皮革的料子,2英寸到2又1/4英寸的宽度。 皮带上包括一个皮带扣,两个盒子和光剑的挂钩。皮带扣为黑色长方形,上面覆盖一个银色D 形金属片,上面有从左至右是递次增大的长方形的小切口。最小的切口是一个小的圆洞, 不呈矩形。在最小的圆洞右侧是一个凸起的圆形金属片。皮带上的两个盒子在皮带扣边上一边一个左右对称。从中间向外,盒子上各有两个绿色的方形发光面板, 其下面有一段长方形的插入式软管,边上是一个小的红灯,和6个银色的小金属销子,从上到小分三排排列。发光绿色矩形面板是平整的,没有斜面。小的红色灯泡可以安装在比其略大一些的金属斜圈里。盒子上所有的灯泡都是一直亮着的。盒子应该垂直地放在皮带扣等距离的两边, 距离皮带扣大概1到2英寸的样子。光剑钩由两个铆钉铆在皮带的左侧, 离左侧的盒子大概半英寸的光景。
belt and belt box.jpg
belt buckle.jpg
lightsaber hook.jpg
 楼主| 发表于 2011-3-17 20:14:34 | 显示全部楼层

10

Surcoat: Ankle length black wool or fabric with an equivalent appearance and weight. The surcoat has open seams long the sides running from the waist to the floor. The garment is gathered in three pleats from the shoulder area on each side of the chest extending to the waist. The surcoat is worn over the codpiece, and under the chest armor and belt.
内袍:使用下至踝关节的黑色羊毛料,或相近样子和份量的布料。内袍中间开口,从腰际一直往下并及地,衣服的每一边从肩部到胸部衍生到腰部处打上三个褶子。内袍覆盖护阴甲,需穿在胸甲和皮带的下面。

官网上没图,我将就补一个。
surcoat3.jpg
 楼主| 发表于 2011-3-17 20:15:33 | 显示全部楼层

11

Codpiece: A padded-construction, the codpiece is faced in black leather or leather-like material. The cod covers the front of the body and extends to the hips. The rectangular inset at its center is edged with rolled piping. The corners of the rectangular inset should be slightly rounded. The codpiece is worn over the bodysuit, but under the belt and surcoat.

护阴甲:内装衬垫, 表面是黑色真皮或相近的皮革料子。此甲覆盖身体的正面并延伸至臀部。甲的中间有矩形的切入形状,其边上用圆形包边围起来。矩形包边的角上应该有一点圆形。此甲应穿戴在紧身衣上, 但需在皮带和内袍的下面。
cod piece.jpg
 楼主| 发表于 2011-3-17 20:16:22 | 显示全部楼层

12

Shin Guards: Black gloss, covering the leg from the ankle to knee joint. Knee is shaped like a diamond, with 6 small square details just under it. A long swoop or U shaped cutout is seen extending from mid shin to ankle.
护膝甲:黑色抛光,从膝盖覆盖到脚踝关节,膝部呈菱形,由6块小的方块装饰其下,从小腿中间到脚踝处有一处U形切口处,或可以说是凹陷处。
shin guard.jpg
 楼主| 发表于 2011-3-17 20:17:27 | 显示全部楼层

13

Boots: Black lace-less round-toe boots of leather or leather-like material with a medium gloss shine. The Vader boot should come up to just below the knee.
靴子:半亚光黑色无鞋带的圆头皮靴(或由其他皮革制成的也可被接受),靴需及膝。
boots.jpg
 楼主| 发表于 2011-3-17 20:18:30 | 显示全部楼层

14

Lightsaber: Scratch built or high-end prop replica. (Scratch-built is based on the MPP Microflash or the Heiland Synchronar 3-Cell flash handle.)
光剑: 自制或高端的道具复刻皆可,(自制光剑需基于MPP手电筒或Heiland 三节电池装的照相闪光棒柄)
esb lightsaber.jpg
 楼主| 发表于 2011-3-17 20:19:17 | 显示全部楼层

16

整图
full body.jpg
 楼主| 发表于 2011-3-17 20:20:12 | 显示全部楼层
不足之处请及时指正,以免误人子弟:)
 楼主| 发表于 2011-3-17 20:28:48 | 显示全部楼层
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表